Every number on this site has a contractor URL.

$1,400 to $2,600Panel replacement at the same amperage in Akron, before a service-size change

$2,000 to $4,000Federal Pacific or Zinsco replacement

$1,500 to $2,500Panel replacement at the same amperage

$2,500 to $4,500100-amp to 200-amp service upgrade

$3,000 to $3,500Typical 200-amp panel replacement or upgrade printed by a Temple shop

$2,200 to $4,800100-amp to 200-amp Federal Pacific replacement printed by a Dallas shop

$2,800 to $3,800FPE / Zinsco replacement printed by an Amery shop

$2,500 to $4,500Panel upgrade pricing printed by a Pewaukee shop

$1,500 to $4,500Typical residential panel upgrade printed by a Northern Colorado shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$1,800 to $3,850100-amp to 200-amp panel upgrade on an existing service drop, including panel, breakers, labor, and permit fees

$1,800 to $3,200100-amp to 200-amp panel upgrade printed on the same shop’s homepage card

$4,500 to $8,500100-amp to 400-amp service upgrade with a new Duke Energy service drop

$1,800 to $3,000Federal Pacific / Zinsco panel replacement

$1,500 to $4,500Most residential panel replacements printed by an Upstate South Carolina shop

$4,800 to $6,200Light 100-amp to 200-amp service upgrade printed by a Savannah shop

$3,000 to $10,000Panel replacement through a full service upgrade in Greater Austin

$1,200 to $3,500Typical panel upgrade in Austin

$3,500+Federal Pacific, Zinsco, Challenger, or Pushmatic panel replacement, printed as a typical starting investment

$2,500+Like-for-like 100-amp panel replacement

$5,500+Full 200-amp service upgrade with utility coordination, meter base, and grounding work

$1,000 to $2,500Typical panel replacement, depending on capacity and features, with a separate service-upgrade band they print at $2,500 to $5,000 or more

$5,000Typical starting figure for a 200-amp panel upgrade in Maryland, with BGE or Pepco utility fees billed separately

$2,500 to $4,500Electrical panel upgrade depending on panel location, service entrance configuration, and utility coordination

$2,500 to $4,500Electrical panel upgrade in Bellingham, including 200-amp service changes on older houses

from $4,500200-amp panel upgrade in Bend and Central Oregon, before existing-wiring, location, permit, and utility add-ons

$2,200 to $3,800100-amp to 200-amp service upgrade printed by a West Texas shop

$2,500 to $4,500Full 200-amp panel upgrade printed by a Nashville shop

from $1,300Standard 200-amp service upgrade in Boise for the simplest replacements, before relocation or rewiring

$1,500 to $3,000100-amp panel upgrade in Newton, including materials, labor, and permitting

$2,500 to $5,000200-amp panel upgrade in Newton

$2,500 to $4,500Typical 100-amp to 200-amp upgrade

$2,500 to $4,500Federal Pacific / Zinsco replacement in Massachusetts and New Hampshire

$3,000 to $6,000Typical 100-amp to 200-amp upgrade printed by a Massillon shop

$2,500 to $4,500100-amp to 200-amp service upgrade printed by an Akron shop that writes Canton

$2,400 to $3,800200-amp panel replacement

$3,800 to $5,500100-amp to 200-amp upgrade with a meter base

$4,800 to $7,000100-amp to 200-amp upgrade plus a service mast plus Rocky Mountain Power coordination

$2,700 to $5,000Main service panel replacements on a Hagerstown shop that writes Chambersburg

$1,800 to $3,500Panel upgrades printed by a Harpers Ferry shop for Martinsburg and Berkeley County

$1,900 to $3,800Permitted 200-amp electrical panel upgrade including meter base, utility coordination, whole-home surge protection, and inspection

$2,200 to $3,800Most Charleston 200-amp panel upgrades including permit, meter base, Dominion Energy coordination, and whole-home surge protection

$1,800 to $3,200Full panel replacement at the same amperage in the Charlotte area

$3,000 to $6,000100-amp to 200-amp panel upgrade in the Charlotte area

$2,000 to $5,500Federal Pacific / Zinsco safety replacement in the Charlotte area

$1,200 to $4,500Typical electrical panel replacement, Charlotte and Monroe

$2,500 to $4,500Full 200-amp panel upgrade from a Nashville shop's Nashville page, not a Chattanooga price

$1,800 to $2,600Fuse boxes and flagged Federal Pacific or Sylvania Zinsco panels from a Bartlett shop's Memphis-area homepage, not a Chattanooga price

$1,500 to $3,000Standard panel replacements in the Chicago area

$1,500 to $4,500Most Illinois / Chicago-area panel upgrades in 2026

$1,300 to $3,000Typical residential electrical panel upgrade across the shop’s California pages, before larger or more complex work

$1,500 to $3,000Most Chico electrical panel upgrades

$4,000 to $6,000Most 200-amp service upgrades in the Cincinnati area, including panel, breakers, permit, labor, and inspection

$1,400 to $3,400Panel replacement only, with a separate 200-amp service-upgrade band they print at $5,600 to $6,800

$1,000 to $3,000Typical home Federal Pacific panel replacement, depending on panel type and where it is installed

$2,200 to $3,800100-amp to 200-amp service upgrade printed by a West Texas shop

$3,000 to $3,500Typical 200-amp panel replacement or upgrade printed by a Temple shop

$2,500 to $5,000Typical 200-amp panel upgrade, depending on existing wiring, panel location, and whether the meter base or service entrance needs updating

$2,500 to $3,500Straight Federal Pacific panel swap that keeps the same service amperage

$3,500 to $5,500100-amp to 200-amp upgrade paired with the Federal Pacific swap

$1,800 to $3,500Typical Columbia residential Federal Pacific to modern 200-amp replacement

$1,800 to $3,500Same-amperage Federal Pacific or Zinsco panel replacement in the Columbia market

$2,500 to $6,500100-amp to 200-amp service upgrade when the meter base or service entrance also has to change

$1,800 to $3,000Zinsco or Federal Pacific panel replacement with a new approved 200-amp panel and full circuit transfer

$1,500 to $2,200Standard 100-amp to 200-amp upgrade when the existing meter base can stay

$2,200 to $3,50060-amp to 200-amp full service upgrade on an older home

$2,750 to $4,800Standard 200-amp Federal Pacific replacement in Dallas-Fort Worth

$2,800 to $7,800Code-compliant 200-amp Federal Pacific replacement in Fort Worth, 2025 to 2026

$5,800 to $7,500Standard 100A-to-200A DFW upgrade including outdoor disconnect, surge, grounding, labor, and permits

$2,500 to $5,000Standard 100-amp to 200-amp upgrade in the Denver metro

$3,000 to $6,000Federal Pacific or Zinsco panel replacement in Denver

$5,350 to $7,800Typical 200-amp electrical service upgrade for their Denver customers in 2026

$2,500 to $6,000Main panel replacement, printed as a standard starting range

$8,000 to $25,000Service update with a new meter socket and panel

$1,800 to $8,000Typical residential 200-amp upgrade

$2,000 to $4,500Federal Pacific or Zinsco replacement printed by a Fort Walton Beach shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$5,000 to $6,000100-amp to 200-amp panel upgrade printed by a Duluth shop

$7,700 to $9,500Federal Pacific or Zinsco to 200-amp upgrade printed by a Twin Cities shop

$2,500 to $4,500Most residential panel upgrades in Lane County, 100-amp or 200-amp

$1,000 to $1,500Typical 200-amp panel replacement printed by an Evansville shop

$2,500 to $4,500Most panel upgrades printed by a Southern Indiana shop

$3,500 to $6,500Standard residential 200-amp panel replacement in the shop’s Northern California service area, depending on existing service complexity, permit fees, and extra work

$1,500 to $3,500Standard 200-amp panel replacement in the Springdale area, before service-entrance or subpanel work

$4,900s to $6,900sMost 200-amp panel replacements in Northwest Arkansas, all-in with permit, breakers, and utility coordination

$2,500 to $4,500Full panel upgrade in Fort Myers, depending on size, location, wiring, and permitting

$3,500 to $5,000Basic 200-amp panel swap in the same location

$4,500 to $6,500Meter-main combo upgrade

$6,000 to $8,500+Full service upgrade with relocation

$2,000 to $4,500Federal Pacific or Zinsco replacement printed by a Fort Walton Beach shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$2,100 to $3,800Most 100-amp to 200-amp upgrades, depending on feeder length, grounding upgrades, and surge-protection options

$1,500 to $3,500Typical 200-amp panel upgrade printed by a Greensboro shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$1,500 to $3,500200-amp panel upgrade in Connecticut, depending on scope

$1,500 to $3,500Typical 200-amp panel upgrade printed by a Greensboro shop, priced away from Hickory

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Florida shop in Palm Coast, an out-of-state price

$2,500 to $4,500Same-amperage panel swap on Oahu, including a Zinsco or corroded panel that stays at the existing service size

$4,500 to $7,500+100-amp to 200-amp heavy-up on Oahu

$2,000 to $4,500Most Houston panel upgrades, installed

$2,500 to $5,000Service upgrade to 200 amps printed by a Tuscaloosa shop

$2,500 to $4,000100-amp to 200-amp upgrade printed by a second Tuscaloosa shop

$1,300 to $3,000National average for a straightforward 100-amp to 200-amp replacement

$4,000 or higherSoutheast Idaho jobs with a new meter base, a relocated panel, or older-home remediation

$2,500 to $3,000Federal Pacific Stab-Lok replacement printed by an Indianapolis shop

$1,500 to $2,500Straightforward 100-amp to 200-amp upgrade printed by a Central Indiana shop

$1,300 to $3,000100-amp to 200-amp overhead upgrade in Murrieta, including new panel, breakers, labor, and permit, with no meter-base change

$1,500 to $4,000Federal Pacific or Zinsco replacement

$4,000 to $6,000Basic same-capacity safety replacement of a blacklisted panel such as Zinsco or Federal Pacific

$4,000 to $8,500Standard 100-amp to 200-amp capacity upgrade in the Temecula Valley, including new enclosure, service-entrance conductors, mast work, grounding, and municipal permit coordination

$850 to $4,000Typical electrical panel upgrade in Jacksonville, including materials and labor

$1,949.87Empire’s printed 2026 figure for a standard 200-amp upgrade in the area

$2,500 to $4,500Full 200-amp panel upgrade printed by a Nashville shop

$1,800 to $2,600Fuse boxes and flagged Federal Pacific or Sylvania Zinsco panels printed by a Memphis-area shop

$2,000 to $4,500Most residential 200-amp panel upgrades in West Michigan

$2,100 to $3,800Most 100-amp to 200-amp upgrades printed by a Holland / Grand Rapids shop

$1,500 to $3,000Average electrical panel upgrade in Lafayette, before a more complex service-entrance change

$3,500 to $6,000Typical 100-amp to 200-amp upgrade in Lake Charles, when the meter base, service-entrance cable, and weatherhead also change

$2,000 to $4,500Federal Pacific or Zinsco replacement printed by a Destin shop, not a Polk County one

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop, not a Polk County one

$1,800 to $3,500Typical 200-amp panel upgrade in Lancaster County, depending on existing wiring, panel location, and whether the meter base also needs replacement

$1,500 to $3,000Straight 100-amp to 200-amp panel swap in a standard Lansing home, panel and installation only

$1,800 to $3,500Full 200-amp panel replacement in Okemos, including permit fees and the Meridian Township inspection

$1,500 to $2,500100-amp panel upgrade in Las Vegas, including the Clark County permit

$2,000 to $3,500200-amp panel upgrade in Las Vegas, including the permit

$3,500 to $6,000400-amp upgrade for larger homes

$3,000 to $3,500Typical 200-amp panel replacement or upgrade printed by a Temple shop, well outside Gregg County

$2,200 to $4,800100-amp to 200-amp Federal Pacific replacement printed by a Dallas shop, well outside Gregg County

$3,400 to $8,500Typical Los Angeles residential panel upgrade

$4,475 to $7,250200-amp upgrade, existing location, overhead service, including LADBS permit

$2,000 to $4,500Residential 100-amp to 200-amp service upgrade, including new panel, breakers, meter base, and permit

$1,500 to $3,000Panel replacement at the same amperage

$2,500 to $4,500Federal Pacific / Zinsco replacement in Massachusetts and New Hampshire

$6,200 to $10,500100-amp to 200-amp service upgrade on the same shop's panel page

$3,000 to $3,500Typical 200-amp panel replacement or upgrade printed by a Temple shop, not a West Texas one

$2,200 to $4,800100-amp to 200-amp Federal Pacific replacement printed by a Dallas shop, not a West Texas one

$1,500 to $4,000Most Georgia 200-amp panel upgrades printed on a statewide contractor page

$4,800 to $6,200Light 100-amp to 200-amp service upgrade printed by a Savannah shop

$3,500 to $6,000200-amp panel upgrade in Southern New Hampshire, moving with meter-base work, existing wiring, and utility coordination

$1,500 to $4,000Straightforward 200-amp panel replacement in the Rogue Valley, including panel, labor, and permit

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$2,400 to $4,500200-amp upgrade printed by an Ocala shop

$1,800 to $2,600Fuse boxes and flagged Federal Pacific or Sylvania Zinsco panels printed by a Bartlett shop

$2,500 to $4,500Full 200-amp panel upgrade printed by a Nashville shop

$2,500 to $3,500200-amp panel replacement at the same amperage in Palm Beach, Broward, and Miami-Dade

$3,500 to $5,50060-amp or 100-amp to 200-amp service upgrade

$2,200 to $3,200Standard 100-amp to 200-amp panel swap in Miami-Dade

$4,000 to $5,500Full service upgrade (panel, meter, service-entrance cable, and extra circuits)

$2,500 to $4,500Panel upgrade pricing printed by a Pewaukee shop that writes Milwaukee

$2,800 to $3,800FPE / Zinsco replacement printed by a northwest Wisconsin shop

$2,000 to $4,500Federal Pacific or Zinsco replacement printed by a Destin, Florida shop

$2,500 to $4,000100-amp to 200-amp upgrade printed by a Tuscaloosa shop

$2,000 to $6,000Typical Central Coast panel replacement

$8,000 to $15,000Panel replacement and upgrade band on the same shop's pricing page

$2,400 to $4,200Most 100-amp to 200-amp residential upgrades installed, before salt-damaged meter-base or mast work

$3,200 to $5,200FPE, Zinsco, or Challenger replacement printed by a Naples shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$2,500 to $4,500Full 200-amp panel upgrade in the Nashville area, including permits, meter base, weatherhead, new panel, surge protection, and labor

$1,800 to $5,500Typical single-family Federal Pacific, Zinsco, GE push-to-reset, or fused-service panel replacement

$2,400 to $3,200Basic 200-amp residential panel upgrade including the panel, wiring, permits, and inspection

$1,800 to $3,500New Orleans-area residential panel upgrade printed by CR Electric, a local cost source that does not print a license number

$2,200 to $3,000FPE, Zinsco, or Challenger replacement from Stevenson's Palm Coast page, a Florida price from outside Louisiana

$1,500 to $3,500Standard 100-amp to 200-amp panel upgrade in a typical Norfolk home

$3,000 to $4,500+100-amp to 200-amp service upgrade on a Virginia Beach shop's 2026 Hampton Roads page

$2,800 to $4,500Standard 100-amp to 200-amp residential upgrade in New Jersey, 2026

$3,500 to $5,500Like-for-like 100A or 150A Federal Pacific or Zinsco replacement, 2026

$2,400 to $4,500200-amp upgrade printed by an Ocala shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$1,500 to $3,000Typical 100-amp to 200-amp service upgrade across Utah, before mast, meter-base, or code-correction work

$2,500 to $4,500Planning range for a straightforward residential panel replacement where the existing service size and surrounding equipment remain usable

$4,500 to $7,500+Planning range for a 100-amp to 200-amp service upgrade that may involve meter or service equipment, conductors, grounding, permits, inspection, and utility coordination

$4,500 to $12,000Electrical panel upgrade in Olympia, depending on amperage and whether a service upgrade is also required

$4,000 to $7,500100-amp to 200-amp panel upgrade, including permit, utility coordination, and inspection

$1,500 to $3,000Typical 200-amp panel upgrade in the Orlando area

$2,000 to $2,500Typical interior main-panel replacement with all-new breakers in Orlando

$1,500 to $4,000Electrical panel replacement in Orlando, including permit fees

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$2,400 to $4,500200-amp upgrade printed by an Ocala shop

$3,000 to $6,500Standard 100-amp to 200-amp residential panel swap in Palm Springs

$3,200 to $5,200FPE, Zinsco, or Challenger replacement printed by a Naples shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$1,500 to $3,500Typical 200-amp panel upgrade printed by a Greensboro, North Carolina shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast, Florida shop

$2,000 to $4,500Federal Pacific or Zinsco replacement printed by a Fort Walton Beach shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$2,000 to $4,500Federal Pacific or Zinsco panel replacement

$1,800 to $4,500100-amp to 200-amp panel upgrade

$2,500 to $3,500Phoenix 200-amp electrical panel upgrade, including labor, materials, permits, and inspection

$1,800 to $4,500Typical Arizona panel replacement

$2,400 to $3,800100A to 200A meter/main, panel only, Scottsdale / greater Phoenix

$3,200 to $5,800Installed Pittsburgh panel-upgrade pricing printed by a shop that names FPE and Zinsco

$1,500 to $3,500Standard 200-amp electrical panel installation printed by a Squirrel Hill shop

$2,000 to $4,000Federal Pacific / Zinsco replacement printed by a Port St. Lucie shop

$2,500 to $5,000Typical 200-amp panel replacement including permits printed by a Palm Beach County shop

$1,500 to $4,000Most residential panel upgrades in Southern Maine

$1,800 to $3,000Direct Federal Pacific or Zinsco swap at the same amperage in Portland

$3,500 to $6,000100-amp to 200-amp service upgrade with new meter base and mast

$2,500 to $4,500Federal Pacific / Zinsco replacement in Portland

$2,500 to $7,500Typical residential panel replacement in the Portland area

$2,500 to $4,500Safety-brand replacement for Federal Pacific or Zinsco

$2,200 to $4,500Most 200-amp panel upgrades in Rhode Island, including the panel, labor, permits, and inspection, depending on service-entrance work, rewiring, or other modifications

$2,000 to $4,000A full panel upgrade, depending on panel size and how much rewiring is involved

$2,000 to $4,500Federal Pacific or Zinsco replacement printed by a Destin shop, not a Charlotte County one

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop, not a Charlotte County one

$1,500 to $5,000Most Wake County panel upgrades, depending on amperage, with a typical 200-amp job they print at $2,000 to $3,000

$1,800 to $3,200Typical 100-amp to 200-amp panel upgrade in Wake, Durham, Chatham, and Johnston counties

$2,600 to $3,600Typical Reno-Sparks electrical panel upgrade

$1,500 to $2,500Extra cost they print for panel relocation

$1,800 to $4,500200-amp panel, printed as typical for most family homes

$2,200 to $3,800Cline's 2026 band for a standard 100-amp to 200-amp upgrade on Roanoke jobs

$1,500 to $3,500Standard 100-amp to 200-amp panel upgrade written for Norfolk homes in Hampton Roads, not for the Roanoke Valley

$1,800 to $3,500100-amp to 200-amp panel upgrade in Sacramento

$2,500 to $10,000Sacramento-area panel work from a sub-panel to a full main-panel replacement

$2,800 to $4,500Most Salem Federal Pacific or Zinsco replacements, fully permitted, printed by a Salem shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$1,500 to $4,000Standard 200-amp electrical panel upgrade in Utah, depending on panel size, wiring, permits, and meter-base work

$2,000 to $4,000Typical Salt Lake City panel upgrade, with meter-base or mast work running higher

$1,800 to $4,500Typical San Antonio panel upgrade, depending on amperage and existing wiring condition

From $5,500Service upgrade 100A to 200A in North County San Diego

$3,500 to $5,500Overhead-service panel upgrade in San Diego County

$7,000 to $20,000Underground-service panel upgrade in San Diego County

$4,800 to $8,500Typical Marin 200-amp panel upgrade for insurance renewal

$3,500 to $6,500Bay Area 100A to 200A panel swap, same location

$4,500 to $14,000Recent Bay Area residential panel and service upgrades

$3,000 to $4,000Main panel replacement on 5 Star's page for San Luis Obispo County homes

$5,400Federal Pacific panel replacement plus a Tesla charger circuit, one Santa Maria case study from outside San Luis Obispo

$2,500 to $5,500+100-amp to 200-amp panel upgrade on a standard single-family house, including permit and PG&E coordination

$1,800 to $3,800+Same-size 200-amp panel replacement, common for insurance-required swaps

$4,500 to $9,500+200-amp to 400-amp upgrade

$5,400One-day Santa Maria Federal Pacific panel replacement plus Tesla charger circuit, printed as a completed fixed-price job

$3,500 to $5,200Same-size 200-amp panel swap printed as Federal Pacific / Zinsco replacement

$4,200 to $6,500100-amp to 200-amp service upgrade with a new panel

$3,500 to $6,500Straightforward 200-amp residential panel replacement in Sonoma County

$2,500 to $4,000Like-for-like panel replacement at the same amperage

$3,500 to $5,000Standard 200-amp panel upgrade, often 100-amp to 200-amp

$2,000 to $4,500200-amp panel upgrade in Sarasota

$4,800 to $6,200Light 100-amp to 200-amp service upgrade on a Savannah home in good condition

$9,000 to $12,000+Full rebuild after fire damage or an insurance-mandated upgrade

$3,500 to $6,500Permitted residential panel-only replacement in Seattle

$5,500 to $8,500+100-amp to 200-amp service upgrade in Seattle

$1,200 to $2,500+Basic panel replacement when the existing service is adequate

$3,500 to $6,500Typical permitted residential panel replacement, King / Pierce / Snohomish / Thurston

$4,000 to $7,500100-amp to 200-amp service upgrade in Seattle and the South Sound

$2,800 to $4,500Typical Federal Pacific or Zinsco replacement including permit and Seattle City Light coordination

$1,500 to $3,500Typical upgrade from a 100-amp to a 200-amp panel, before a more complex service-entrance change

$1,500 to $4,500Most residential panel replacements in Greenville

$1,500 to $5,000Electrical panel upgrade band on the same shop’s Greenville guide

$1,800 to $4,000Full panel replacement for most Spokane homeowners, depending on panel size, wiring, labor, and permitting

$2,500 to $4,000Most 200-amp panel upgrades in Spokane, depending on panel location, wiring condition, and permitting

$2,200 to $3,000FPE, Zinsco, or Challenger replacement for Palm Coast homes, a Flagler County band and not a St. Augustine one

$2,400 to $4,500200-amp upgrade from a buyer's guide for Ocala homes, written in Marion County for Marion County jobs

$1,800 to $3,500Electrical panel replacement, including upgrades from Federal Pacific, Zinsco, or other recalled brands

$2,500 to $4,500Federal Pacific panel replacement, including the new panel, labor, permits, and inspection, with the spread depending on whether a service upgrade is required

$1,500 to $3,000100-amp panel upgrade, printed as a California average range

$3,000 to $6,000200-amp panel upgrade, printed as a California average range

$1,800 to $2,800Charlie's proactive Federal Pacific panel replacement

$3,500 to $5,000Emergency panel replacement after an insurance crisis, printed on the same page

$1,800 to $3,200100-amp to 200-amp standard panel upgrade in Tampa

$2,200 to $3,800Federal Pacific / Zinsco / Pushmatic swap-out in Tampa

$3,000 to $3,500Typical electrical panel replacement or upgrade to 200-amp service in the Temple area

$1,500 to $4,000+Standard 100-amp to 200-amp upgrade printed by a Villages shop

$2,400 to $4,500200-amp upgrade printed by an Ocala shop

$1,500 to $3,500Published panel-upgrade range as of this writing, varying with panel size, accessibility, and any needed rewiring

$2,400 to $3,600Most panel upgrades, depending on amperage, panel type, wiring condition, and permit requirements

$1,500 to $3,500Electrical panel replacement in Tulsa, printed as a typical range

$1,300 to $3,000Complete electrical panel upgrade in Tulsa

$2,500 to $5,000Service upgrade to 200 amps printed by a Tuscaloosa shop

$2,500 to $4,000100-amp to 200-amp upgrade printed by a second Tuscaloosa shop

$7,700 to $9,500Federal Pacific or Zinsco replacement to a modern 200-amp panel

$3,000 to $7,000Standard full-service electrical panel upgrade in Minneapolis, St. Paul, and suburbs

$3,000 to $3,500Typical 200-amp panel replacement or upgrade printed by a Temple shop

$2,200 to $4,800100-amp to 200-amp Federal Pacific replacement printed by a Dallas shop

$2,600 to $4,500100-amp to 200-amp panel upgrade in Southern California, including permit and utility coordination

$1,500 to $3,500Panel upgrades on a Ventura shop FAQ

$1,800 to $3,000Like-for-like residential panel replacement at the same amperage, including permit and inspection

$3,500 to $7,500Typical 200-amp panel upgrade, including permit, surge protection, and Dominion coordination

$2,500 to $4,500Panel upgrade pricing printed by a Pewaukee shop

$2,800 to $3,800FPE / Zinsco replacement printed by a northwest Wisconsin shop

$3,500 to $10,500200-amp panel upgrade in Palm Beach County, depending on scope, permit fees, and whether the meter base needs replacement

$2,500 to $5,000Typical 200-amp panel replacement including permits

$3,200 to $5,200FPE, Zinsco, or Challenger replacement printed by a Naples shop

$2,200 to $3,000FPE, Zinsco, or Challenger replacement printed by a Palm Coast shop

$4,500 to $6,500Electrical panel upgrades in Worcester, depending on current panel size, new service size, meter-base condition, and extra work such as grounding or service-entrance replacement

$2,500 to $4,500100-amp to 200-amp panel upgrade

$2,500 to $5,000Federal Pacific or Zinsco panel replacement