Panel Letter

Altamonte Springs / Seminole County

Federal Pacific panel replacement in Altamonte Springs

Altamonte Springs lets licensed contractors file a stand-alone electrical permit online. An owner who pulls the permit has to apply in person at 225 Newburyport Avenue, be the building's sole occupant, and sign the owner-builder affidavit there.

Last reviewed 2026-10-23. Print this page if you need a copy for someone else in the house.

Request quotes from licensed electricians who do insurance-flagged panel replacement

Do you have an insurance letter about this panel?

Photo upload comes later. A picture of the closed door and the inside label is enough if someone asks.

Altamonte Springs lets licensed contractors file a stand-alone electrical permit online. An owner who pulls the permit has to apply in person at 225 Newburyport Avenue, be the building's sole occupant, and sign the owner-builder affidavit there.

The city's FAQ adds a warning of its own. It tells homeowners not to pull a permit on a contractor's behalf, because the homeowner then answers for all of the work.

What Duke Energy Florida actually wrote

The city's own electric utility exists to power city buildings. Its page says the Florida Public Service Commission gave the Altamonte Springs service area to Duke Energy long ago. Confirm the logo on the bill before anyone prices the job.

Duke's Florida tariff splits the meter from the box it sits in. Under rule 5.01 the meter stays Duke's property, while a self-contained meter enclosure is the customer's to furnish, maintain, or replace. The seal is covered in rule 5.02:

Such meter seals must not be removed, destroyed or tampered with by any person other than an authorized representative of the Company.

Rule 5.04 lists what tampering costs: prosecution under Florida law, rebilled past service, and Duke's extra expenses. The tariff says nothing about how long the power stays off during a panel change.

Permits in Altamonte Springs

Building and Fire Safety is at 225 Newburyport Avenue, (407) 571-8446, open 7:30 a.m. to 4:30 p.m. on weekdays. Electrical work takes its own permit, separate from any building permit.

A contractor has to be on file before it can pull permits here, with a copy of its Florida license, a local business tax receipt, and proof of workers' compensation coverage or an exemption. After that, a stand-alone electrical permit that needs no plans can be filed online.

Who pulls the permit matters. Near the top of Altamonte's affidavit, one line is set in capitals: owners must personally appear at the Building Department to sign it. The FAQ spells out what a homeowner on the permit answers for: Florida Building Code requirements, OSHA obligations, IRS tax issues such as FICA withholding, and liability insurance.

Inspections are booked at (407) 571-8433 from 7:30 a.m. to 4 p.m. for the next day, or online.

Price, without inventing one

R. Howe Electric's Altamonte Springs page has no price. Spectrum Electric, which works out of Casselberry, has an Altamonte Springs page that puts a full 100-amp to 200-amp upgrade in most homes there at $1,800 to $3,500, depending on the service entrance wiring and the meter base.

Sanford Electric Company's 2026 guide is written for Sanford, and its service list includes Altamonte Springs. It puts a typical replacement with Seminole County permits at $2,500 to $4,500 and tells a 100-to-200 customer to plan near the top. Those two systems do not match. We will not average them. We are not inventing a Newburyport Avenue midpoint from either system.

R. Howe Electric gives a Sanford address on West Airport Boulevard, and its Altamonte Springs page says older homes there often still have Federal Pacific and Zinsco panels that Florida insurers reject. The page prints EC13015623. Florida's electrical contractor extract, downloaded 10/23/2026, lists EC13015623 as R. HOWE ELECTRIC, INC., Current and Active through 08/31/2028.

What to hand the carrier

Lead the carrier file with the finaled Altamonte Springs electrical permit and its passed inspection. The invoice should match the EC number filed with Building and Fire Safety. If the underwriter's letter lists photos or a load calculation, include them then.

Electricians who advertise this job

A shop is listed only if it advertises Federal Pacific, Zinsco, or insurance-driven panel replacement on its own site and prints a license number there. Trade-association locators already exist. We will not pad this list. Verify the license before you hire.

To get introduced, use the quote form on this page. We do not send you to the shop from here.