Federal Pacific panel replacement in Palm Coast

One Flagler shop names Federal Pacific, Zinsco, and Challenger on its own site and prints an EC number. FPL still owns the meter. The Building Division on Lake Avenue still issues the permit.

The city inspector will not own the FPL seal. FPL will not print the Lake Avenue electrical permit. Those two systems do not match. A helper with a van cannot stand in for either one.

What the utilities actually wrote

Most Palm Coast and Daytona Beach bills are FPL. Confirm the logo on the bill before anyone prices the job.

Start with the Project Portal job aid. Only FPL is authorized to disconnect service conductors going to the home.

Customers can self-schedule a residential disconnect and reconnect for single-phase services at or under 320 amps.

All electrical work involving a meter enclosure requires an electrical inspection by the inspecting authority before FPL re-energizes the service.

Inspections must be submitted to FPL by 1 p.m. Eastern so same-day reconnect is possible.

The Electric Service Standards add a second path. FPL normally performs both the disconnect and the reconnect. A licensed and qualified electrical contractor may disconnect an overhead single-phase service of 300 amps or less only when FPL approves it, the attachment point stays intact, no FPL locking device is on the socket, and a reconnect appointment is already scheduled. That exception is not a homeowner meter-pull path.

FPL does not publish a guaranteed power-off hour count. Stevenson’s writes that it coordinates the meter release with FPL. That is a contractor field note.

Permits in Palm Coast and in Flagler County

Inside the city, start at Building Division, 160 Lake Avenue. The phone is (386) 986-3780.

Who pulls the permit matters. The city’s checklist says the permit application must be signed by the licensed contractor if the contractor is to obtain the permit. Contractors must be registered with the Building Department. Owning the home does not mean you should pull the permit and then hire someone under your name.

Unincorporated Flagler County and Daytona Beach file at their own counters. A quote that only says “we handle the permit” should name the city on the address.

Price, without inventing one

Two Florida contractor pages publish panel bands and do not hide the split.

Stevenson’s Palm Coast page prints FPE, Zinsco, or Challenger replacement at $2,200 to $3,000. Vetcon’s Ocala blog prints a 200-amp upgrade at $2,400 to $4,500. Vetcon works Marion County, so the Ocala band shows what an inland shop prints, not what a Palm Coast job will cost. Those two systems do not match. We will not average them. We are not inventing a Lake Avenue midpoint from either system.

Florida license lookup is public. Ask for the EC number and check it before you sign. One shop advertises this work on their own site and prints a license number. Stevenson’s panel page names Federal Pacific, Zinsco, and Challenger. The shop’s own site prints EC0001685. They write daily work from 134 London Dr. They are listed for the panel letter, not as a Flagler County directory.

Directory-only shops are omitted. A page that names these brands and does not print a Florida EC number is not a listing. The listed shop is not affiliated with Panel Letter.

What to hand the carrier

The useful packet is the closed City of Palm Coast, Flagler County, or Volusia electrical permit, the passed electrical inspection, an invoice with the license number that was on the permit, and photos if the letter asks. If your electrician produces a load calculation or panel schedule, send that too. We did not find a carrier page that publishes a single statewide sticker form. Ask the agent what they will actually open.