Federal Pacific panel replacement in Lubbock

LP&L wrote the reconnect rule in the installation book. Building Safety still wants the CSS electrical permit first. Armstrong’s Lubbock panel-upgrade page names Federal Pacific Stab-Lok and Zinsco among the panels it replaces, and the site footer prints TECL 32611.

LP&L keeps the meter and the seal notice. Building Safety keeps the CSS electrical permit at Avenue K. Those two systems do not match. LP&L’s installation book puts that seal notice on a qualified person, and the CSS file goes to Building Safety, not a helper.

What the utilities actually wrote

Match the company name on your bill to the rules on this page before the quote is written.

Start with the Standards for Electric Installation. Connection to or disconnection from LP&L’s distribution system shall be made by LP&L personnel.

Under no circumstances will the customer be permitted to climb LP&L poles, gain unauthorized access to LP&L underground facilities, or make connection to any LP&L facility.

LP&L shall be notified when it is necessary to cut the meter seal due to situations where the electric service must be disconnected during an emergency or where necessary to access the meter socket by a qualified person.

No persons, other than employees or agents of LP&L, may relocate meters or other equipment owned by LP&L. That is not a homeowner meter-pull path.

LP&L does not publish a guaranteed power-off hour count.

Permits in Lubbock

Inside the city, start at Building Safety, 1314 Avenue K. The phone is 806-775-2087.

Who pulls the permit matters. The city’s FAQ says electrical permits must be obtained by a licensed electrical contractor or master electrician. A homestead owner can pull structural, plumbing, and mechanical files when that owner does the work. That homestead path does not cover the electrical file. When you hire the swap, the TECL on the CSS application should be the contractor’s, not a homestead affidavit under your name.

This page is the Avenue K file and LP&L’s Lubbock rules. A quote that only says “we handle the permit” should name the city on the address.

Price, without inventing one

Armstrong prints no dollar figure on its Lubbock panel page, so both bands below come from Temple and Dallas, not from West Texas.

MEP in Temple puts a typical 200-amp replacement or upgrade around $3,000 to $3,500. Clements in Dallas prints $2,200 to $4,800 for a 100-amp to 200-amp Federal Pacific replacement that folds in the panel, breakers, permit, inspection, and labor. Neither shop writes Lubbock or Lubbock County prices. Those two systems do not match. We will not average them. We are not inventing an Avenue K midpoint from either system.

Search the TECL on TDLR before you sign, and confirm the business name matches the quote. Armstrong’s Lubbock panel page names Federal Pacific and Zinsco. The shop’s own site prints TECL 32611. The shop’s own page puts the Lubbock street address in the footer. Naming it here means the TECL checked out, not that it is the county’s only option.

Directory-only shops are omitted. Pages that name these brands with no TECL on them were left off this list. The listed shop is not affiliated with Panel Letter.

What to hand the carrier

The useful packet is the closed City of Lubbock electrical permit, the passed electrical inspection, an invoice with the license number that was on the permit, and photos if the letter asks. If your electrician produces a load calculation or panel schedule, send that too. We did not find a carrier page that publishes a single statewide sticker form. Ask the agent what they will actually open.