If the power is cut, Augusta will not release it until its own inspector has been on the Telfair Street file. Georgia Power still owns the laterals. One Fairview Avenue shop names Federal Pacific and Zinsco on its own site and prints a Georgia EN number.
The city inspector will not own the Georgia Power laterals. Georgia Power will not print the Telfair Street electrical permit. Those two systems do not match. A helper with a van cannot stand in for either one.
What the utilities actually wrote
Most Augusta and Richmond County bills are Georgia Power. Confirm the logo on the bill before anyone prices the job.
Start with Augusta’s own handout. If the power is cut or turned off, the power company will not release without the city’s inspection.
After the work, call 706-312-5050 to schedule that inspection.
Once the inspection is complete, the office releases power.
You still coordinate the reconnection with the power company.
Georgia Power’s Blue Book adds the company-side rule. Disconnection of service laterals and removal of service connections shall be made by Company only.
In areas where electrical inspection is provided, the Public Service Commission requires inspector approval of the customer wiring to the service connection before the company connects the customer service to its system.
The developers portal says to always contact Georgia Power before beginning a project. Call 1-877-365-3276 to reach an engineer. That is not a homeowner meter-pull path.
Some Aiken and North Augusta roads can be a South Carolina cooperative. Those are different disconnect desks.
Georgia Power does not publish a guaranteed power-off hour count.
Permits in Augusta-Richmond County
Inside the consolidated government, start at License and Inspection, 535 Telfair Street, Suite 300. The phone is 706-312-5050.
Who pulls the permit matters. Augusta’s page says a permit is required for electrical projects exceeding $500. Owning the home does not mean you should pull the permit and then hire someone under your name.
North Augusta, Aiken, Evans, and Columbia County file at their own counters. A quote that only says “we handle the permit” should name the city on the address. North Augusta and Aiken are in South Carolina. The Telfair Street counter, the Georgia EN lookup, and the Georgia Power rules on this page do not cover those addresses.
Price, without inventing one
Two contractor pages publish panel bands and do not hide the split.
Redland’s Greenville page prints most residential Federal Pacific or Zinsco replacements at $1,500 to $4,500. Joyner’s Savannah page prints a light 100-amp to 200-amp service upgrade at $4,800 to $6,200. One band comes from Greenville and the other from Savannah, so neither is an Augusta price. Mister Sparky’s unsafe-panels page shows no price. Ask for one on paper. Those two systems do not match. We will not average them. We are not inventing a Telfair Street midpoint from either system.
Georgia license lookup is public. Ask for the EN number and check it before you sign. One shop advertises this work on their own site and prints a license number. Mister Sparky’s unsafe-panels page names Federal Pacific and Zinsco replacements. The shop’s own site prints EN218691. They write daily work from 1727 Fairview Avenue. They are listed for the panel letter, not as a Richmond County directory.
Directory-only shops are omitted. A page that names these brands and does not print a Georgia EN number is not a listing. The listed shop is not affiliated with Panel Letter.
What to hand the carrier
The useful packet is the closed Augusta-Richmond County electrical permit, the passed electrical inspection, an invoice with the license number that was on the permit, and photos if the letter asks. If your electrician produces a load calculation or panel schedule, send that too. We did not find a carrier page that publishes a single statewide sticker form. Ask the agent what they will actually open.
Typical replacement cost
One Upstate shop and one Savannah shop publish panel bands that do not match. We are not inventing a Telfair Street midpoint from them
$1,500 to $4,500
Most residential panel replacements printed by an Upstate South Carolina shop
Their Greenville Federal Pacific and Zinsco page. A Savannah shop prints a light 100-amp to 200-amp service upgrade at $4,800 to $6,200. Those two systems do not match. We will not average them. We are not inventing a Telfair Street midpoint from either system.
Source: Redland Electric$4,800 to $6,200
Light 100-amp to 200-amp service upgrade printed by a Savannah shop
Their Savannah service-upgrade page. This is not Redland’s $1,500 to $4,500 FPE line. Those two systems do not match. We will not average them. It prices a service upgrade. A like-for-like panel swap is a different scope.
Source: Joyner Electric & Security
Permit
Augusta-Richmond County License and Inspection
Who pulls it: License and Inspection sits at 535 Telfair Street, Suite 300, Augusta, GA 30901. The published inspection phone is 706-312-5050. Hours on the permits page are 8:30 a.m. to 5:00 p.m. weekdays. Electrical service-change applications can go through the CityView portal. North Augusta, Aiken, Evans, and Columbia County are not the Telfair Street file.
Augusta’s permit page is blunt. A permit is required for electrical projects exceeding $500. All new installation and repair work requires a permit. The electrical service-change handout adds a second rule. If the power is cut or turned off, the power company will not release without Augusta’s inspection. After the work, call 706-312-5050 to schedule that inspection. Once it is complete, the office releases power. You still coordinate the reconnection with the power company. Electrical trades require certificates of competency from the Georgia State Industry Licensing Board. No permit, except for homeowners, shall be issued to anyone other than a properly licensed contractor. A quote that only says we handle the permit should name Augusta, Richmond County, or Aiken on the address. Georgia electrical-contractor advertising is the Secretary of State EN number. Ask for the number they will put on the Telfair Street file.
Utility coordination
Georgia Power on most Augusta bills
Who disconnects: Augusta’s own electrical handout is blunt. If the power is cut or turned off, the power company will not release without the city’s inspection. Georgia Power’s 2023 Blue Book adds the company-side rule. Disconnection of service laterals and removal of service connections shall be made by Company only. In areas where electrical inspection is provided, the Public Service Commission requires inspector approval of the customer wiring to the service connection before the company connects the customer service to its system. The developers portal says to always contact Georgia Power before beginning a project. Call 1-877-365-3276 to reach an engineer. That is not a homeowner meter-pull path.
Outage window: Georgia Power does not publish a guaranteed power-off hour count for a residential panel swap.
Confirm the logo on the bill before anyone prices the job. Most Augusta and Richmond County addresses are Georgia Power. Some Aiken and North Augusta roads can be a South Carolina cooperative. Those are different disconnect desks. A like-for-like panel swap still needs the city inspection and that Georgia Power disconnect. A service-size change is still the company’s disconnect and reconnect, not a helper cutting the seal.
What to hand the insurer
- Closed Augusta-Richmond County electrical permit
- Passed electrical inspection (the approval Augusta sends before Georgia Power reconnects)
- Georgia Power reconnect record if the job needed one
- Invoice showing the Georgia EN number used on the permit
- Photos of the old and new panel if the carrier’s letter asks for them
- Load calculation or panel schedule if the electrician produced one
Ask your agent for the exact list. Carriers do not publish a single national checklist.
Electricians who advertise this job
A shop is listed only if it advertises Federal Pacific, Zinsco, or insurance-driven panel replacement on its own site and prints a license number there. Trade-association locators already exist. We will not pad this list. Verify the license before you hire.
To get introduced, use the quote form on this page. We do not send you to the shop from here.
Mister Sparky of Augusta
Augusta, GA
Published license: EN218691 (Georgia Secretary of State)
Own unsafe-panels page that names Federal Pacific and Zinsco replacements, backed by Ga. Lic# EN218691 printed on the shop’s own site.
How this page was built
Compiled by Panel Letter on 2026-10-12 from the public pages below. If a fact was not on a cited page, it is marked as unverified in the copy. This is a research guide, not a bid.
- Mister Sparky of Augusta, Unsafe electrical panels
Names Federal Pacific (FPE) and Zinsco panels and replacement. Prints License EN218691 and Ga. Lic#EN218691. Shop at 1727 Fairview Ave, Augusta, GA 30904. Does not print a dollar band on the fetched page.
- Redland Electric, Federal Pacific and Zinsco electrical panels in Greenville
Prints most residential replacements at $1,500 to $4,500. Cost source only here.
- Joyner Electric, Electrical service upgrade in Savannah
Prints a light 100-amp to 200-amp service upgrade at $4,800 to $6,200. Cost source only here.
- Augusta-Richmond County, When permits are required
A permit is required for electrical, plumbing, gas, and mechanical projects exceeding $500. All new installation and repair work requires a permit. License and Inspection phone 706-312-5050. Hours 8:30 a.m. to 5:00 p.m. weekdays. 535 Telfair Street, Suite 300.
- Augusta-Richmond County, Electrical service change or repair, no power
If the power is cut or turned off, the power company will not release without Augusta’s inspection. After the work, call 706-312-5050. Once the inspection is complete, the office releases power. Coordinate reconnection with the power company.
- Augusta-Richmond County, Permit information
Electrical trades require certificates of competency from the Georgia State Industry Licensing Board. No permit, except for homeowners, shall be issued to anyone other than a properly licensed contractor.
- Augusta-Richmond County, Building permits
Electrical service changes can be submitted through the CityView portal. Questions go to 706-312-5050.
- Georgia Power, Blue Book 2023
Disconnection of service laterals and removal of service connections shall be made by Company only. Inspector approval is required before the company connects the customer service.
- Georgia Power, Developers portal
Always contact Georgia Power before beginning a project. Engineer line 1-877-365-3276.
- Georgia Secretary of State
Official Georgia contractor-license lookup.