Federal Pacific panel replacement in Port St. Lucie

The insurance letter is not the Building Department file. Huffman Road is where one shop prints the Florida EC number. FPL still owns the conductors going to the house.

The city inspector will not cut the FPL seal. FPL will not print the Port St. Lucie electrical permit. Those two systems do not match. A helper with a van cannot stand in for either one.

What the utilities actually wrote

Most Port St. Lucie, Stuart, and Fort Pierce bills are FPL. Confirm the logo on the bill before anyone prices the job.

Start with the Project Portal job aid. Only FPL is authorized to disconnect service conductors going to the home.

Customers can self-schedule a residential disconnect and reconnect for single-phase services at or under 320 amps.

All electrical work involving a meter enclosure requires an electrical inspection by the inspecting authority before FPL re-energizes the service.

Inspections must be submitted to FPL by 1 p.m. Eastern so same-day reconnect is possible.

The Electric Service Standards add a second path. FPL normally performs both the disconnect and the reconnect. A licensed and qualified electrical contractor may disconnect an overhead single-phase service of 300 amps or less only when FPL approves it, the attachment point stays intact, no FPL locking device is on the socket, and a reconnect appointment is already scheduled. That exception is not a homeowner meter-pull path.

FPL does not publish a guaranteed power-off hour count. Imperium writes that it coordinates the meter pull with FPL. That is a contractor field note.

Permits in Port St. Lucie and on the Treasure Coast

Inside the city, start at Building Department, 121 SW Port St. Lucie Boulevard. Permitting is (772) 871-5132.

Who pulls the permit matters. Florida Statute 489.103(7)(b) makes the owner-builder path an in-person file. The homeowner has to appear at the Building Department. The signature has to be notarized there. Owning the home does not mean you should pull the permit and then hire someone under your name.

Stuart, Fort Pierce, and Vero Beach file at their own counters. A quote that only says “we handle the permit” should name the city on the address.

Price, without inventing one

Two Florida contractor pages publish panel bands and do not hide the split.

Imperium’s electrical page prints Federal Pacific / Zinsco replacements at $2,000 to $4,000. Trophy’s June 2026 Palm Beach County page prints a typical 200-amp replacement at $2,500 to $5,000. Those two systems do not match. We will not average them. We are not inventing a Huffman Road midpoint from either system.

Florida license lookup is public. Ask for the EC number and check it before you sign. One shop advertises this work on their own site and prints a license number. Imperium’s panel page names Federal Pacific and Zinsco replacements. The shop’s own site prints EC 13009338. They write daily work from 1446 SE Huffman Rd. They are listed for the panel letter, not as a Treasure Coast directory.

Directory-only shops are omitted. A page that names these brands and does not print a Florida electrical contractor number is not a listing. The listed shop is not affiliated with Panel Letter.

What to hand the carrier

The useful packet is the closed City of Port St. Lucie or other municipal electrical permit, the passed electrical inspection, an invoice with the license number that was on the permit, and photos if the letter asks. If your electrician produces a load calculation or panel schedule, send that too. We did not find a carrier page that publishes a single statewide sticker form. Ask the agent what they will actually open.